How Often Does the AUDI Brake Pad Change?

The importance of the braking system is self-evident. When emergency braking is needed, can the brake stop within the shortest distance become the key to resolve the accident. The following OE Brake Pads Manufacturer will come to tell you.

There is no such thing as how often the brake pads are changed. Depending on the driving conditions and driving habits, these habits will affect the use of the brake pads. If you can master them well, you will find that many times you don’t need to step on the brakes. With good film use, it can reach 100,000 kilometers.

Then, when it is necessary to replace the brake pads, you can pass the following periodic inspections, and you must replace them immediately if there is a compliance.

1.Check the thickness of the brake pads

To check whether the AUDI Brake Pad is thin, you can use a small flashlight to observe it. When the inspection shows that the black friction material of the brake pads is quickly worn away, the thickness is less than 5 mm, you should consider replacing it.

AUDI Brake Pad

2.Brake sound

Because the frequency, time, and intensity of each brake are different, it is not possible to determine whether to replace the brake pads based on mileage or time. In order to solve this problem, when the brake pads are manufactured in the factory, a warning metal plate is provided outside the limit wear layer. When the metal plate is worn out, it will make a sharp squeak sound, reminding you that you should replace the brake pads. If in the daily driving process, the brake hears a harsh metal howling sound, you must pay attention to this time. This is the alarm iron on the brake pads has begun to wear the brake disc, so this sharp metal sound.

3.Brake strength

When driving on the road, if you feel very strenuous, there is always a soft feeling. You often need to step the brake deeper to achieve the previous braking effect. When you apply emergency braking, you will obviously feel that the pedal position is low. It is possible that the brake pads have basically lost their friction and must be replaced at this time, otherwise serious accidents may occur. In addition, the reduction of the braking effect will lead to an increase in the consumption of brake fluid, so it is important to check the condition of the brake fluid while replacing the brake pads.

If the brake pads have induction wires, a red alarm “Please check the brake pads” will appear in the general alarm. Then there is an icon, a circle, surrounded by a few dashed brackets. It is quite dangerous to change the warning light when it is on, because some of this warning system directly senses the thickness of the brake pads, and some are on the brake pads. It has been completely worn out, and the brake oil is extremely reduced, so that the warning light will be turned on.

The above is the frequency of AUDI brake pads introduced by Chevrolet Brake Pad Manufacturer.