How To Distinguish The True And False Brake Pads?

In addition to running fast, a car has to stop, so the car is not sloppy except for the car.

Big data shows that the demand for brake friction plates in the country is about 400 million a year, and the brake friction plates produced by regular enterprises are only 70% of the total, such as Ford Brake Pad, and 30% of the market demand. gap. Because this means that one of our four brake pads is likely to be a cottage product!

Ford Brake Pad

Why is it not genuine? Then let's first understand the structural composition of a brake pad.

The structure of the brake pad: The brake pad is generally composed of a steel plate, a bonding heat insulation layer and a friction block. The friction block is composed of a friction material and an adhesive, and is squeezed on the brake disc or the brake drum to generate friction when braking, thereby achieving the purpose of deceleration and braking of the vehicle.

The friction block of the brake pad mainly includes: the current high-performance brake pads are mostly made of carbon fiber and metal materials, and emphasize the environmentally friendly formula without asbestos.

So how can we choose the right brake pad? Chevrolet Brake Pad Manufacturer will come to tell you.

First, look at its packaging. When choosing the brake friction plate, the owner should pay attention to the packaging. The formal enterprises will not be stupid enough to make their own signs. As far as possible, the product packaging is very beautiful, the font is clear, the logo is also standardized; and the counterfeit products are due to the manufacturer's technology. Limited, the packaging is very eclectic, simple and rude, the fonts can not be seen clearly, and some even have no logo.

Genuine brake pads such as Ceramic Brake Pad have a rough surface and a slightly darker color. There will also be a flow guiding groove on each side of the friction plate. The font on the back is clearly engraved and the overall craftsmanship is fine. The outer box is printed in a bright and unbiased color, and the paper is tough and has a laser anti-counterfeit label.

The fake brake pads look rougher, but they don't feel as frictional as the real one. Moreover, the color is slightly shallow, and there are a lot of impurities in the inside, and there are no guide grooves on both sides. The grease reservoir on the back is directly penetrated and the exposed friction plates are visible.

In addition to the outer packaging, there are some manufacturers who use the real packaging + fake products for the poor manufacturers.

We can use the experience to identify its true and false. After the brake lining is installed, the test is carried out, and the owner pays attention to the brake feeling when the brake is applied. If you find that the brake pedal has a hard feeling, makes strange noises, and there are some strange smells that overflow during work, it is most likely a fake brake lining. Because the qualified brake pads produced by the formal enterprises will not be noisy under normal conditions, there will be no odor.

The use time of the brake pads is also a very important judgment point. Generally speaking, the use period of the fake brake friction discs is relatively short, even if some of the sturdy cottage friction plates are used for a long time, but these fake and shoddy The performance of the product is not good, the braking effect is poor, and the car will still slide for a long distance to stop. After a period of use, the false friction linings are prone to flaking and cracking, cementation, etc., and the normal condition does not usually occur.

Today, I will take you to learn how to identify the brake pads. I hope that everyone can choose the brakes when they choose the brakes. The brakes are the soul parts of a car. I hope everyone must pay attention when buying. The supplier of the film, do not think that the cheap and cheap, and let their own purchase of counterfeit and shoddy products, hurt their own interests.