Tel.: + 86 13191696556
Home >> News

The Composition Of Brake Pad

Jul. 30, 2019

Here is Austin Brake Pad Supplier talking about the composition of brake pad.


If you need any information about Disc Brake Pads, feel free to contact us.


Austin Brake Pad Supplier


The brake pads are also called brake pads. In the brake system of the car, the brake pads are the most critical safety parts. All the brake effects are decisive for the brake pads, so the good brake pads are the protector of people and cars. Excessive braking will break the brake pads. Do not brake hard or slowly step on to ensure the life of the brake pads.


Automobile brake pads are generally composed of steel plates, bonded insulation layers and friction blocks. The steel plates are painted to prevent rust. The SMT-4 furnace temperature tracker is used to detect the temperature distribution during the coating process to ensure quality. The insulation layer is composed of a material that does not transfer heat, and is intended to be insulated. The friction block is composed of a friction material and an adhesive, and is squeezed on the brake disc or the brake drum to generate friction when braking, thereby achieving the purpose of deceleration and braking of the vehicle. Due to the friction, the friction blocks are gradually worn out, and generally the lower the cost, the faster the brake pads wear. After the friction material is used, the brake pads should be replaced in time, otherwise the steel plate and the brake disc will be in direct contact, eventually losing the braking effect and damaging the brake disc.


Brake pads are generally composed of steel plates, bonded insulation layers and friction blocks. The steel plates are painted to prevent rust. The SMT-4 furnace temperature tracker is used to detect the temperature distribution during the coating process to ensure quality. The insulation layer is composed of a material that does not transfer heat, and is intended to be insulated. The friction block is composed of a friction material and an adhesive, and is squeezed on the brake disc or the brake drum to generate friction when braking, thereby achieving the purpose of decelerating the brake of the vehicle. Due to the friction, the friction blocks are gradually worn out, and generally the lower the cost, the faster the brake pads wear. After the friction material is used, the brake pads should be replaced in time, otherwise the steel plate and the brake disc will be in direct contact, eventually losing the braking effect and damaging the brake disc.


Previous: Automechanika Johannesburg 2019

Next: APAACE Automechanika Mexico 2019 will be held in Mexico City, Mexico on July 6-8, 2019.